 |
|
 |
|
GOS-6103
100 MHz with Cursor Readout and Mem
The GOS-6103C is a 100MHz, two-channel, dual-sweep, portable oscilloscope for general purpose use. A microprocessor-based operating system controls most of the functions of the instrument, including cursor readout and digitized panel setting. On-screen alphanumeric readout and cursor function for voltage, time, frequency and phase measurement provide extraordinary operational convenience. It also has the function of auto measurement for frequency, period, pulse width and duty cycle. Ten different user defined instrument settings can be saved and recalled without restriction.
Features
- 100 MHz, Dual Channel, Delayed Sweep
- Built-in 6 Digit Universal Counter (GOS-6103C)
- 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
- Time Base Auto-range (GOS-6103/GOS-6103C)
- Cursor Readout with 7 Measurements
- Panel Setup Lock of Digital-Control Functions
- Buzzer Alarm
- LED Indicators
- TV Synchronization
- Trigger Signal Output
- Z-Axis Modulation Input
- SMD Technology, High Stability and Reliability
Specification
| CRT |
| Type |
6-inch rectangular type with
internalgraticule; 0%, 10%, 90%
and 100% markers. 8 x 10 DIV
(1 DIV = 1 cm) |
| Phosphor |
P31 |
| Accelerating Potential |
16 kV approx.
|
| Illumination |
Continuously adjustable |
| Z-axis input |
| Coupling |
DC |
| Sensitivity |
5V or more |
| Maximum Input Voltage |
30V (DC+AC peak) at 1kHz or less |
| Bandwidth: |
DC ~ 5MHz |
| Vertical System |
| Sensitivity |
2mV ~ 5V / DIV,11 step in 1-2-5
sequence |
| Sensitivity Accuracy |
< 3% (5 DIV at the center of display) |
Vernier Vertical
Sensitivity |
Continuously variable to
1 / 2.5 or
less panel-indicate value |
| Bandwidth (-3dB) |
DC ~ 100MHz (2mV/DIV: DC ~ 20MHz) |
| Rise Time |
3.5nS (2mV/DIV : 17.5 nS) |
| Signal Delay |
Leading edge can be monitored |
| Max. Input Voltage |
400V (DC+AC peak) at 1kHz or less |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
1M Ohm ±2%// approx. 25pF |
| Vertical Mode |
CH1, CH2, DUAL (CHOP/ALT),
ADD, CH2 INV. |
| Bandwidth Limited |
20MHz |
Common-Mode
Rejection Ratio |
50:1 or better at 50kHz |
| Dynamic Range |
div at 100MHz |
| Horizontal System |
| Horizontal Modes |
MAIN (A), ALT, DELAY (B) |
| A (main) Sweep Time |
50nS ~ 0.5S / DIV, continuously
variable (UNCAL) |
| B (delay) Sweep Time |
50nS ~ 50mS / DIV |
| Accuracy |
±3% (±5% at x 10 MAG) |
| Sweep Magnification |
x 10 (maximum sweep time
5nS / DIV) |
| Hold Off Time |
Variable |
| Delay Time |
1µS ~ 5S |
| Delay Jitter |
Better than 1:20000 |
| Alternate Separation |
Variable |
| Trigger |
| Trigger Modes |
AUTO, NORM, TV |
| Trigger Source |
CH1, CH2, LINE, EXT |
| Trigger Coupling |
AC, DC, HFR, LFR |
| Trigger Slope |
± polarity or TV sync polarity |
| Trigger Sensitivity |
| Mode |
Frequency |
INT |
EXT |
| AUTO |
10Hz~20MHz
20MHz~100MHz |
0.35 DIV
1.5 DIV |
50 mV
150 mV |
| NORM |
DC~20MHz
20MHz~100MHz |
0.35 DIV
1.5 DIV |
50 mV
150 mV |
| TV |
sync signal |
1 DIV |
200 mVpp |
|
| TV Sync |
TV-V, TV-H |
Max. External
Input Voltage |
400V (DC+AC peak) at 1kHz |
External Input
Impedance |
1M Ohm ±5%, // approx. 25pF |
| X-Y Operation |
| Mode |
Y-axis: selectable CH1, CH2,
CH1 and CH2 |
Sensitivity
Accuracy |
2mV ~ 5V/DIV ±3%;
EXT: 0.1V/DIV ±5% |
X-axis
Bandwidth |
DC ~ 500kHz (-3dB) |
| Phase Error |
3¼ or less from DC ~ 50kHz |
| Output Signal |
| Trigger Signal Output |
Voltage: approx. 25mV/DIV into 50Ω |
| Calibrator Output |
1kHz Squarewave, 2Vpp ±2% |
| Cursor Readout Function |
Cursor Measurement
Function |
Δ
V, ΔV%, ΔVdB, ΔT, 1/Δ T,
ΔT%, Δθ |
| Cursor Resolution |
1/100 DIV |
Effective
Cursor Range |
Vertical: ±3DIV;
Horizontal: ±4DIV |
Panel Setting Display
Vertical: V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD,
INV, probe factor, AC/DC/GND
Horizontal: S / DIV(MTB,DTB), UNCAL, x 10MAG,
delay time, HO
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y, lock, SAVE/RECALL MEM 0-9 |
| Special Function |
| TIME/DIV Auto Range |
Provided (GOS-6103/GOS-6103C) |
Panel Setting
Save & Recall |
10 sets (GOS-6103/GOS-6103C) |
| Panel Setups Lock |
Provided |
| Power Source |
| AC 100V / 120V / 230V ± 10%, 50 / 60Hz |
| Accessories |
| Power cord x1, Instruction manual x1, Probes(10:1/1:1) x 2 |
| Dimensions and Weight |
| 310(W) x 150(H) x 455(D) mm; Approx. 9kg |
|
|
|
 |
 |
