 |
Order Form
Online Ordering Coming Soon
|
 |
|
GDS-806S
60 MHz DSO 100 MSa/s, Mono
The GDS-806S is a useful, 2 channel digital storage oscilloscope including: up to 10ns peak detection for glitch capture, a large 5.7” mono or color LCD display, two input channels - each with a record length of 125k points and 8 bits vertical resolution, a time base of 1ns/div~10s/div., a 6-digit trigger frequency counter and much more.
Features
- 60MHz Bandwidth With MONO Display
- 125k Memory and 12 Division Horizontal Display
- 25GS/s Sampling Rate for Repetitive Waveforms
- Advanced Trigger: Pulse Width , TV Line, Event Delay and Time Delay
- Go/NoGo, Auto Setup Sequence and TTF Function
- Built-In Help Menu, Multi-Language and FREE PC Software
- Standard Interface: RS-232C
- Optional Interface: GPIB, Printer Port and USB 2.0
Specifications
|
Display System |
| Display Device
| Mono (320 x 240) |
| Display Contrast
| Adjustable |
Waveform
Display Graticule |
8 x 10 divisions (8 x 12 when menu off) |
| Vertical System |
| Bandwidth |
60MHz |
| Channels |
2 |
| Vertical Resolution |
8-bit |
| Vertical Sensitivity |
2mV/div ~ 5V/div |
| Vertical Accuracy |
±3% |
| Rise Time |
< 5.8ns |
| Input Coupling |
AC, DC, Ground |
| Input Impedance |
1M Ohm ± 2%, ~18pF |
| Polarity |
Normal & Invert |
Max. Voltage
Between Signal
and common at
Input BNC |
300V (DC+AC peak), CATII |
Waveform
Signal Process |
CH1 + CH2, CH1 - CH2, FFT |
| Offset Range |
2mV/div~50mV/div: ±0.5V;
100mV/div~500mV/div:
1V/div~5V/div: ±50V
|
| BW Limit |
20MHz (-3dB) |
| Horizontal System |
Time Base
Range |
1ns/div ~ 10s/div ( 1-2-5 increments ),
Roll: 250ms/div ~ 10s/div |
| Time Base Mode |
Main, Window, Window Zoom, Roll, X-Y |
Time Base
Accuracy |
± 0.01% |
| Delay Range |
Pre-trigger: 20 div |
| Signal Acquisition System |
Real-Time
Sample Rate |
7NB
100MS/s maximum on each channel |
Equivalent
Sample Rate |
25GS/s E.T. maximum on each channel |
| Record Length |
125h/CH |
| Peak Detection |
10ns (500ns/div ~ 10s/div) |
Acquisition
Mode |
Sample, Peak Detect, Average |
| Average |
2, 4, 8, 16, 32, 64, 128, 256 |
| Trigger |
| TriggerSource |
CH1, CH2, Line, Ext |
| Mode |
Auto Level, Auto, Normal, Single,
TV, Time Delay, Event Delay, Edge,
Pulse Width, AC, DC, HF, LF, Noise Reject |
| Coupling |
AC, DC, HF, LF, Noise Reject |
| Sensitivity |
DC ~ 25MHz: Approximate 0.5div or 5mV |
| X - Y Mode |
X-Axis Input
Y-Axis Input |
Channel 1
Channel 2 |
| Phase Shift |
±3° at 100 kHz |
|
Cursor and Measurement |
Auto
Voltage and
Measurement |
Vpp , Vamp , Vavg , Vrms , Vhi ,
Vlo ,
Vmax , Vmin |
Auto Time
Measurement |
Frequency, Period, Rise Time,
Fall Time, Positive Width,
Negative Width, Duty Cycle |
| Measurement |
Voltage difference between cursors and
(ΔV),Time difference between cursors
(1/ΔT), Frequency difference between
cursors (1/ΔT) |
| Frequency Counter |
Readout
Resolution |
6 digits |
Frequency
Range |
AC Coupled, 20Hz~rated bandwidth;
resolution: 10Hz |
Single
Source |
All available trigger source except the
Pulse Width and Video Trigger mode |
| Adjustable Probe |
Frequency
Range |
1kHz ~ 100kHz 1KHz/STEP |
| Calibration Signal |
| Duty Cycle |
5% ~ 95% 5%/STEP |
| External Trigger |
| Range |
15V |
| Sensitivity |
DC ~ 25MHz: ~ 50mV;
25 ~ 60MHz: ~ 100mV |
Input
Impedance |
1M Ohms ±2%, ~ 18pF |
Maximum
Input |
300V (DC + AC peak) , CATII |
| Control Panel Function |
| AutoSet |
Autoset can adjust vertical ( Volt/div ), Horizontal ( Sec/div) and Trigger level automatically |
| Save/Recall |
Up to 15 sets of measurement
conditions can be saved and recalled |
Waveform Trace
Save/Recall
| 2 sets of waveform can be
saved and recalled |
Interface |
| Standard |
RS-232C |
| Optional Opt. 01 |
GPIB Interface |
| Optional Opt. 11 |
USB, Printer Port, Go/NoGo Output |
| Power Source |
| 100V ~ 240V AC 47Hz ~ 63Hz , Auto selection |
| Accessories |
| Instruction Manual x 1 , Power Cord x 1 , Probe x 2 |
| Dimensions and Weights |
| 310W x 142H x 254D (mm), Approximate 4.1 kg |
|
|
|
 |
 |
